Tandem Hydraulic Jacks: Why You Need a Flow Divider

Two jacks on one pump will not move together on their own. Oil takes the easiest path. The jack with less load extends first, and the trailer tilts. A flow divider fixes that.

What a flow divider does

It splits pump flow evenly between two circuits. Each jack gets the same amount of oil, so both move at the same rate. On the return stroke it recombines the flow.

Two Stillwell options

Part What it does Use it when
NeXgen Flow Divider Splits flow evenly to two jacks and recombines on return Your circuit already holds load, or you add check valves separately
NeXgen Cube Flow divider/combiner plus dual pilot-operated check valves in one CNC-machined, anodized aluminum block You want both jacks synchronized and locked under load with one part

The Cube cuts fittings and leak points. One block replaces a divider, two check valves and the plumbing between them.

Typical setup: dual Atlas on a gooseneck

  1. Mount both double acting Atlas jacks.
  2. Run pump extend and retract lines to the Cube or flow divider.
  3. Run one pair of lines from the block to each jack.
  4. Bleed both jacks together through full strokes.

Full plumbing: Dual Atlas gooseneck installation guide. New to jack types? Read Single Acting vs Double Acting Hydraulic Trailer Jacks.

Shop NeXgen valves and manifolds

Back to blog